Capillary Viscometer

Home Petroleum Testing Products Capillary Viscometer

1. Cannon Fenske Routine Viscometer

Cannon Fenske Routine Viscometer

Features

  • The Cannon-Fenske Routine viscometer is a rugged viscometer that works well if the liquid to be measured is transparent or translucent.
  • In general, if the meniscus (the curvature at the top of the liquid             column) can be readily observed through a column of liquid 3-mm in             diameter, the Cannon-Fenske Routine viscometer and other             transparent-type viscometers (like BS/U-Tube viscometers) can be used.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29A-25 (size 25) 250.0020.5 To 2
Hi-Tech 29A-50 (size 50) 500.0040.8 To 4
Hi-Tech 29A-75 (size 75) 750.0081.6 To 8
Hi-Tech 29A-100 (size 100) 1000.0153 To 15
Hi-Tech 29A-150 (size 150) 1500.0357 To 35
Hi-Tech 29A-200 (size 200) 2000.0120 To 100
Hi-Tech 29A-300 (size 300) 3000.2550 To 250
Hi-Tech 29A-350 (size 350) 2000.5100 To 500
Hi-Tech 29A-400 (size 400) 4001.2240 To 1200
Hi-Tech 29A-450 (size 450) 4502.5500 To 2500
Hi-Tech 29A-500 (size 500) 5008.01600 To 8000
Hi-Tech 29A-600 (size 600) 60020.04000 To 20000

Note:

Sample Volume required: approx. 7 ml.
Suitable for Lubricants, Fuels.
Bath Depth required 203mm (8”)

2. Cannon Fenske Reverse Flow Viscometer

Cannon Fenske Reverse Viscometer

Features

  • Special reverse flow viscometers have been designed for testing opaque liquids.
  • Reverse flow viscometers wet the timing section of the viscometer          capillary only during the actual measurement.
  • The Cannon-Fenske Opaque, Zeitfuchs Cross-Arm, and BS/IP/RF U-Tube viscometers are all reverse flow types.
  • Reverse flow viscometers must be cleaned, dried, and refilled before a repeat measurement can be made.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29B-25 (size 25) 250.0020.5 To 2
Hi-Tech 29B-50 (size 50) 500.0040.8 To 4
Hi-Tech 29B-75 (size 75) 750.0081.6 To 8
Hi-Tech 29B-100 (size 100) 1000.0153 To 15
Hi-Tech 29B-150 (size 150) 1500.0357 To 35
Hi-Tech 29B-200 (size 200) 2000.0120 To 100
Hi-Tech 29B-300 (size 300) 3000.2550 To 250
Hi-Tech 29B-350 (size 350) 2000.5100 To 500
Hi-Tech 29B-400 (size 400) 4001.2240 To 1200
Hi-Tech 29B-450 (size 450) 4502.5500 To 2500
Hi-Tech 29B-500 (size 500) 5008.01600 To 8000
Hi-Tech 29B-600 (size 600) 60020.04000 To 20000

Note:

Sample volume required approx. 12ml
Suitable for: Lubricants, transformer, fuel and paint industry.
Bath depth required: 225mm (9”)(8”)

3. B S/U Type Viscometer

B S/U Type Viscometer

Features

  • It is used measure viscosity of Transparent Newtonian Liquid.
  • In general, if the meniscus (the curvature at the top of the liquid            column) can be readily observed through a column of liquid 3-mm in            diameter, the BS/U type and other transparent-type viscometers (like            cannon Fenske routine viscometers) can be used.
  • Suitable for Chemical, fuel, lubricants and transformer oils.
  • Sample Volume Required: 7 ml (size A to C), 12 ml( Size D to F ) , 23ml            ( size G to H).
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29C-0 (size 0) 00.0010.3 To 3
Hi-Tech 29C-a (size a) A0.0030.9 To 3
Hi-Tech 29C-b (size b) B0.012 To 10
Hi-Tech 29C-c (size c) C0.036 To 30
Hi-Tech 29C-d (size d) D0.120 To 100
Hi-Tech 29C-e (size e) E0.360 To 300
Hi-Tech 29C-f (size f) F1.0200 To 1000
Hi-Tech 29C-g (size g) G3.0600 To 3000
Hi-Tech 29C-h (size h) H10.02000 To 10000

Note:

Suitable for Chemical, fuel, lubricants and transformer oils.
Sample Volume Required: 7 ml (size A to C), 12ml (Size D to F ) , 23ml ( size G to H).
Bath Depth Required: 280mm (11”)

4. U Tube Reverse Flow Viscometer

U Tube Reverse Flow Viscometer

Features

  • Viscometers have been designed for testing opaque liquids.
  • Reverse flow viscometers wet the timing section of the viscometer capillary only during the actual measurement.
  • The Cannon-Fenske Opaque, Zeitfuchs Cross-Arm, and cannon Fenske reverse flow are all reverse flow types
  • Reverse flow viscometers must be cleaned, dried, and refilled before a repeat measurement can be made.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29D-1 (size 1) 10.0030.6 To 3
Hi-Tech 29D-2 (size 2) 20.012 To 10
Hi-Tech 29D-3 (size 3) 30.036 To 30
Hi-Tech 29D-4 (size 4) 40.120 To 100
Hi-Tech 29D-5 (size 5) 50.360 To 300
Hi-Tech 29D-6 (size 6) 61.0200 To 1000
Hi-Tech 29D-7 (size 7) 73.0600 To 3000
Hi-Tech 29D-8(size 8) 810.02000 To 10000
Hi-Tech 29D-9(size 9) 930.06000 To 30000
Hi-Tech 29D-10(size 10) 10100.020000 To 100000
Hi-Tech 29D-11(size 11) 11300.060000 To 300000

Note:

Sample Volume required: 7 ml
Bath depth required: 280mm (11”).(11”)

5. Supended Level Shortened Form

Supended Level Shortened Form

Features

  • It is used to measure the viscosity of transparent Newtonian oils.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures
  • Suitable for Lubricants, fuel and transformer oil especially at low temp.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29E-1 (size 1) 10.00080.6 To 3
Hi-Tech 29E-2 (size 2) 20.0032.1 To 3
Hi-Tech 29E-3 (size 3) 30.013.8 To 10
Hi-Tech 29E-4 (size 4) 40.036 To 30
Hi-Tech 29E-5 (size 5) 50.120 To 100
Hi-Tech 29E-6 (size 6) 60.360 To 300
Hi-Tech 29E-7 (size 7) 71.0200 To 1000
Hi-Tech 29E-8(size 8) 83.0600 To 3000
Hi-Tech 29E-9(size 9) 910.02000 To 10000

Note:

Suitable for Lubricants, fuel and transformer oil especially at low temp.
Sample volume required: 11 ml
Bath depth required: 250mm (10”)

6. Supended Level

Supended Level

Features

  • It is used to measure the viscosity of transparent Newtonian oils.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures.
  • Suitable for Lubricants, paint industry.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29F-1 (size 1) 10.0013.5 To 10
Hi-Tech 29F-2 (size 1a) 1a0.036 To 30
Hi-Tech 29F-3 (size 2) 20.120 To 100
Hi-Tech 29F-4 (size 2a) 2a0.360 To 300
Hi-Tech 29F-5 (size 3) 31.0200 To 1000
Hi-Tech 29F-6 (size 3a) 3a3.0600 To 3000
Hi-Tech 29F-7 (size 4) 410.02000 To 10000
Hi-Tech 29F-8(size 4a) 4a30.06000 To 30000
Hi-Tech 29F-9(size 5) 5100.020000 To 100000

Note:

Suitable for Lubricants, fuel and transformer oil especially at low temp.
Sample volume required: 11 ml
Bath depth required: 275mm (11”)

7. Ubbelhode

Ubbelhode

Features

  • The Ubbelhode viscometer and other suspended level viscometers are also used to measure transparent liquids.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • Unlike the Cannon-Fenske Routine viscometer, suspended level viscometers possess the same viscometer constant at all temperatures.
  • This property is advantageous when measurements are to be made at a number of different temperatures.
Read more
Model No Size Nominal Conastant Viscosity Range in Cst
Hi-Tech 29G-25 (size 25) 250.0020.5 To 2
Hi-Tech 29G-50 (size 50) 500.0040.8 To 4
Hi-Tech 29G-75 (size 75) 750.0081.6 To 8
Hi-Tech 29G-100 (size 100) 1000.0153 To 15
Hi-Tech 29G-150 (size 150) 1500.0357 To 35
Hi-Tech 29G-200 (size 200) 2000.0120 To 100
Hi-Tech 29G-300 (size 300) 3000.2550 To 250
Hi-Tech 29G-350 (size 350) 2000.5100 To 500
Hi-Tech 29G-400 (size 400) 4001.2240 To 1200
Hi-Tech 29G-450 (size 450) 4502.5500 To 2500
Hi-Tech 29G-500 (size 500) 5008.01600 To 8000
Hi-Tech 29G-600 (size 600) 60020.04000 To 20000

Note:

Suitable for Lubricants, fuel and transformer oil especially at low temp.
Sample volume required: 11 ml
Bath depth required: 250mm (10”)

Get Quote